Air Ride A3 v1.0 by MoMo
Author: tacsi68 | 5-12-2018, 09:12 | Views: 1 070 | Comments: 0
Description about « Air Ride A3 v1.0 by MoMo »
Air Ride A3 v1.0 by MoMo for Euro Truck Simulator 2 game.
-Compatible with any physics mod
-Must be higher than any physics mod
-Camera Physics must be enabled
This mod makes your driver seat move up & down like it's on air suspension.
It can both work as a stand alone or an add on for any other physics mod.
A : Extra sensitivity, Low frequency (may not work correctly with 1.33)
A2 : Medium high sensitivity. Medium high frequency. (may not work correctly with 1.33)
A3: Extra sensitivity, Low frequency, No pitch movement. (not tested with older than 1.33)
B : High sensitivity, High frequency movement. (may not work correctly with 1.33)
C : Extreme sensitivity (may not be realistic), Low frequency (may not work correctly with 1.33)
Use instructions & Compatibility:
1. Make sure you have enabled the “physics camera” in the game option menu. And its bar has been set to 100%.
2. (Recommended) Set the “Trailer Stability” to 0%.
3. This mod must be higher than any other physics mod, and higher than truck mods too.
– Compatible with game patch 1.33 and all DLCs.
– Compatible with all physics mods, all maps, all trucks.
Simple steps to install ETS2 Mods:- download the mod «Air Ride A3 v1.0 by MoMo»
- use WinRAR or 7-zip and unzip the archive;
- copy the file with the extension .scs in My Documents/Euro Truck Simulator/mod folder
- start the game, go to your profile, see the Mod manager and activate the mod.
Add comment to this mod
Did u tried this mod? We offer you to share your feedback from what you tested! Your review will be useful to viewers who are just about to download and to try this new mod.