ETS2 Mods | Euro Truck Simulator 2 | Truck Mods

Description about « Realistic water temp. & oil pressure for Scania by »

---

Realistic water temp. & oil pressure for Scania in ETS2

 

Note from the Author:

Here is a small mod with realistic water temperatures and oil pressure.

Water temperature improvement :
BEFORE : When the engine is warm, the water temp. is set to 110°C (which is obviously unrealistic).
AFTER : When the engine is warm, the water temp. is set to 90°C (at the middle).

Oil pressure improvement :
BEFORE : When you full throttle, the oil pressure gauge pass 7 bars. (which is obviously unrealistic).
AFTER : When you full throttle, the oil pressure doesn't exceed 5,5 bars. And at the idle the needle shows 2 bars.

 

This mod works with :
RJL's Scania's (T and R-Streamline Modifications v1.1)
SCS's R Series
SCS's Streamline
R2008 50keda reworked by Matdom1988

- LHD & RHD versions supported.

You are allowed to post the mod on other sites but keep the original link and the credits.

Do not reupload !

[media=http://www.youtube.com/watch?v=Db_tjuc6Njc]

Simple steps to install ETS2 Mods:

- Download the mod «Realistic water temp. & oil pressure for Scania by»
- Use WinRAR or 7-zip and unzip the archive;
- Copy the file with the extension .scs in My Documents/Euro Truck Simulator/mod folder
- Start the game, go to your profile, see the Mod manager and activate the mod.