🚛 ETS2 Mods Euro Truck Simulator 2 Mods

❄️ Realistic Refrigeration Unit Simulator for ETS2 - this modification adds a highly realistic Thermo King SLXi-style refrigeration unit controller and simulation system for refrigerated trailers in Euro Truck Simulator 2 (and ATS), making temperature management, fuel consumption, and unit operation an important part of reefer transport.

Features Realistic Refrigeration Unit Simulator:
– 🖥️ Realistic Thermo King SLXi controller with animated startup, shutdown, and menus
– 🌡️ Temperature setpoint range: -20°C to +20°C (or -4°F to +68°F)
– 🔄 CONTINUOUS and CYCLE-SENTRY operating modes
– 🚀 TURBO mode for large temperature differences
– ❄️ Smooth heating/cooling with ambient temperature effects
– ⏱️ Game-time tracking (unit continues working during rest/time skip)
– 🚪 Door modes (closed, open, dock) affecting temperature change
– ⛽ Separate 190 L reefer fuel tank per trailer
– 📊 Realistic fuel consumption based on mode and conditions
– 🧠 Trailer-ID memory (fuel level and engine hours saved)
– 🔊 Realistic startup, running, and shutdown sounds with volume controls
– 💾 Trip pause and state saving
– ✅ Separate profiles for ETS2 and ATS

Changes in v1.2.19:
– 🆕 Fixed CYCLE-SENTRY logic
– 🆕 Fixed Fahrenheit temperature mode

👉️ Tested on game version 1.60.x

Changes in v1.2.18 (1.60.x):

• A realistic Thermo King SLXi controller with animated startup, shutdown, configuration, and menu screens.
• Unit control through ON, OFF, SET POINT, MENU, and contextual soft keys.
• Temperature setpoint range from -20 to +20 C or from -4 to +68 F.
• Celsius/Fahrenheit switching directly from the controller menu.
• Two operating modes:
• CONTINUOUS - the unit runs continuously;
• CYCLE-SENTRY - the unit stops after reaching the setpoint and restarts automatically when temperature drifts.
• TURBO mode when chamber temperature differs significantly from the setpoint.
• Smooth chamber heating and cooling with thermostat variation and ambient-temperature effects.
• Game-time tracking: when time is skipped during rest in ETS2/ATS, the unit still consumes fuel and changes chamber temperature as if that time actually passed.
• Realistic thermal loss: when the unit is off or out of fuel, chamber temperature gradually moves toward ambient temperature.
• Door modes: doors closed, doors open, and dock operation. Open doors speed up the thermal change.
• A separate 190-litre reefer fuel tank for every trailer.
• Fuel consumption based on operating mode, temperature, and engine activity.
• Trailer-ID memory: fuel level and engine hours are retained for every previously used trailer.
• Refuelling with a fuel-level indicator and sound effect.
• Empty-tank behavior: the unit engine stops and chamber temperature begins to react to ambient conditions.
• Realistic startup, running, and shutdown sounds.
• Separate inside-cab and outside volume controls.
• Automatic sound response when leaving the cab, leaning out of the window, and moving the external camera away from the reefer.
• Trip pause: save the panel state while parked and continue after loading the next game session.
• Separate ETS2 and ATS profiles: temperature units, fuel, operating mode, and paused state never mix between games.
• Trailer compatibility checks and compact service information in the lower status area.
• Windows tray icon: open the panel, start or stop the local server, view the version, or exit.
• Installer for ETS2 and ATS with automatic Steam installation detection.
• The panel appears in Windows Installed apps and supports standard uninstallation.

​Download Link 1​​​

Simple steps to install ETS2 Mods

• 📥 Download the mod «Realistic Refrigeration Unit Simulator v1.2.19 (1.60.x) for ETS2»
• 📦 Use WinRAR or 7-Zip to extract the archive
• 📁 Copy the .scs file into My Documents / Euro Truck Simulator 2 / mod
• 🎮 Launch the game → Profile → Mod Manager → Activate the mod