16+2 Converter Transmission for Ets2 by adi2003de
Version game: 1.27.x
Total views: 3 499
16+2 Converter Transmission for Ets21.27.x game version
Transmission available for all SCS standard trucks + Scania RJL
No changes to the truck
Changes to the motors:
Adaptation of the torque curve to the gearbox
Switch points changed in the engine electronics
Max. Speed: 1650 rpm (ensuring a clean kick-down behavior)
Changes in Physics:
My real physics was incorporated, because the clutch characteristics are anchored in it,
and I have adapted the operation of the converter clutch to the transmission
Converter works with a stall torque of 2.85
This means that the rear axle can reach up to 1500 hp of power.
Depending on the input power
Basic about the transmission:
2 crawler Gears
16 forward Gears
4 reverses
The best result for keyboard players with disabled power mode
The best result for controller and steering wheel: Normal power mode.
Screenshots
-
🔗 Support the work and effort of the author by downloading files exclusively from the official links.
✅ You ensure that you download an authentic and safe version.
✅ You directly support the author to continue developing and improving the project.
✅ You avoid the risk of modified or infected files from unofficial sources.
Simple steps to install ETS2 Mods:
- Download the mod «16+2 Converter Transmission for Ets2 by adi2003de»- Use WinRAR or 7-zip and unzip the archive;
- Copy the file with the extension .scs in My Documents/Euro Truck Simulator/mod folder
- Start the game, go to your profile, see the Mod manager and activate the mod.
zfwandler_all_scs_trucks_by_adi2003de.scs [161.31 Kb] (downloads: 118)
Related Mods:
Leave a comment
Did u tried this mod? We offer you to share your feedback from what you tested! Your review will be useful to viewers who are just about to download and to try this new mod.