TT Truck and Driver Physics v1.6 SOFT
Version game: 1.33.x, 1.34.x
Total views: 1 691
Description about « TT Truck and Driver Physics v1.6 SOFT »
TT Truck and Driver Physics v1.6 SOFT for Ets2 1.34.x game version
This mod increases the truck's cab oscillations.
In ETS2 the drive is fixed as if it is connected to the seat.
The drive head does not move.
It is designed to partially simulate the movements of the driver's body and the driver's head.
You can adjust the trailer balance as you wish.
My mode does not change your existing trailer settings.
SETTINGS (!!! Important)
Significant changes were made to truck physics in ETS2 1.33 and 1.34.
Depending on this, you can make settings as follows.
In your settings you can mark the realistic camera movement and
make the desired adjustment using the coefficient slider.
From the Command Console
You can use "g_suspension_stiffness 1"
or "g_suspension_stiffness 0"
to increase or decrease oscillations.
This mode works in Ets2 1.31.x,1.32.x,1.33.x and 1.34.x game versions.
All SCS trucks are compatible with Volvo trucks from Eugene and Pendragon.
(SCS will work well with all 3rd party trucks using truck chassis.)
Tested with 900 degree steering wheels.
Have fun.
Tekteker haydar
Screenshots
Simple steps to install ETS2 Mods:
- Download the mod «TT Truck and Driver Physics v1.6 SOFT»- Use WinRAR or 7-zip and unzip the archive;
- Copy the file with the extension .scs in My Documents/Euro Truck Simulator/mod folder
- Start the game, go to your profile, see the Mod manager and activate the mod.
Related Mods:
Leave a comment
Did u tried this mod? We offer you to share your feedback from what you tested! Your review will be useful to viewers who are just about to download and to try this new mod.
admin26 December 2024 11:39