Category > Sounds ETS 2> Scania NextGen 500 DC13 Sound Pack v1.1 (1.50.x) for ETS2

Scania NextGen 500 DC13 Sound Pack v1.1 (1.50.x) for ETS2


13-08-2024, 19:36. Author: admin
Scania NextGen 500 DC13 Sound - consisting of high-quality sound samples recorded from a 2019 Scania R500, equipped with a stock 12.7 l Scania DC13 Euro 6 engine. All sounds from the Scania NG have been professionally recorded using studio audio equipment, such as the engine, all interior sticks, switches and tones, the gearbox, the air-brakes, ... The sound pack is compatible with the Scania R&S 2016 by SCS and the Scania P/G/R/S pack by Eugene, for all DC13 engines available.

Features Scania NextGen 500 DC13 Sound:
  • extremely detailed engine sound recorded every 100 rpms in 4+1 channel format with 4 synchronized microphones placed around the engine & exhaust
  • each interior switch, stick and warning tone recorded from the real truck and implemented into the game (e.g. blinkers, blinker stick, retarder stick, light switch, electric windows, etc.)
  • many brand-new features have been implemented that aren't part of the base mechanics due to a lot of programming and testing:
    • multi-directional soundscape that changes depending on your position to the truck (new with EVO1)
    • dynamic idle sound
    • dynamic air compressor sound which activates when braking or if the air pressure is low
    • warning tones when turning off the engine without parking brake or with lights on
    • multiple sound samples for one sound event (e.g. light switch with 3 different sounds, multiple engine start/stop sounds, different sounds for high-beam on/off, …)
    • air sounds when engaging/disengaging the parking brake
    • multiple sounds that are only triggered under certain driving conditions (e.g. engine brake engaging when shifting up for faster gear changes)
  • many details such as key sounds when starting/stopping the engine, button sounds for raising/lowering the lift-axle, gear selector sound when shifting into reverse and much more
  • every sound placed to the correct 3D-position (interior + exterior)
  • Scania Opticruise gearbox shift + retarder sounds
  • custom sound attenuation config for the truck cabin to have a very realistic sound insulation in the interior (since ETS2 1.43 only!)
  • other things I can't remember anymore but which you'll notice if you listen close enough ;)

Tested on game version 1.50.x 


Go back