Download best ETS 2 | Euro Truck Simulator 2 Game ModsETS2 Mods for Free

/ ETS2 Mods » Other mods ETS 2 » Ai Traffic » Real Traffic Density and Ratio 1.31.e by Cip (1.31.x)

Real Traffic Density and Ratio 1.31.e by Cip (1.31.x)

Author: tacsi68 | 10-08-2018, 13:40 | Views: 1 023 | Comments: 0
Real Traffic Density and Ratio 1.31.e by Cip (1.31.x) Version game: 1.31.x Total views: 1 023
Category: Ai Traffic
Version Game: 1.31.x
Credits: cipinho

Description about « Real Traffic Density and Ratio 1.31.e by Cip (1.31.x) »


Real Traffic Density and Ratio 1.31.e for Ets2 1.31.x game version 

New Update for 1.31.e:
-reduced traffic on local roads, it's now easier to overtake
-trucks can now drive without a trailer, very rarely
-added traffic on dirt road with very low density (rule by Todor Alin)
-added different deceleration_limit values by type of vehicles (innovation of Todor Alin)

Mod Density and Intensity of Traffic (v1.31.x) 

The following parameters are implemented:

- from 4:00 to 10:00 and from 15:00 to 20:00 the density changes 
every half hour, from 10 to 15 and from 20600 to 4:00 each hour; 
- high density in the morning and in the afternoon with the subsequent gradual 
decrease by the evening. Peak flow occurs at 8:30 and 17:00; 
- High density on motorways during the day and reasonable intensity at night with a minimum at 02: 00-03: 00; 
- relatively high density on local roads, variable frequency allows you to easily overtake; 
- Proportional ratio of transp. means; 
- very low traffic density on local roads at night; 
- improved cycle of traffic lights at all intersections (two types of cycle);
- Up to 3 seconds the duration of the yellow after the green is increased in order to avoid emergencies; 
- The duration of yellow after red is reduced to 1 second (be careful!); 
- the cycle of work of traffic lights on road works is changed, red burns for 12 seconds. 

It is recommended to place density and intensity modes in priority with respect to cards and traffic packs. 

- fixed speed indication error in the navigator; 
- the number of vehicles with illumination turned on in bad weather was increased 
- the density and intensity values were changed during the day; 
- Added a new rule that allows some cars to move faster than the speed limit; 
- Removed several obsolete rules;
- Added personalized daily density limits for slow vehicles; 
- increase the speed of default trucks for more frequent overtaking; 
- increase / decrease the speed of traffic cars to create a visible discrepancy 
between different cars (some older models of cars are slower going). 
- reduced the frequency of cars and trucks in cities; 
- urban transport was removed from local roads; 
- edited car coloring; 
- Traffic was removed from country roads (except for agricultural transport); 
- Slow transport vehicles on highways and in cities have been removed. 

Compatibility:
It is recommended to connect the density mode to the SFP pack, 
it contains changes in the tractor and combine files. 
Priority over traffic packets is also desirable. 


Features:
Since 1.30, SCS has given to us a brand new traffic system, which has introduced a lot of new
options to build a nice realistic traffic. Following a beta version that some of you have tested already
(thank you by the way for you outputs in my old thread viewtopic.php?f=177&t=228339),
I share with you my updated my mod in which I have kept the main features of my old traffic mod,
therefore if you wish to know more you may please have a look in the above mentioned link.
I suggest the old thread to remain open only for discussions related to 1.28 game version and below
and start a new thread here. I have also modified the mod's title and versioning to be in line with game version.
Despite the few bugs in the new traffic system that I hope SCS will solve soon, it has been finally
possible to update to the new traffic system and I have tested many combinations in order to obtain a
realistic density all day long and also to take advantage from the new system with different traffic density
and ratio on each type of roads individually. For example, it is possible now to have more buses in
cities and more trucks on motorways, also more cars at rush hours, and more trucks during the night. 

How to use:
- because it contains modified files for tractor and harvester which are also present
in Sound fixes pack by Drive Safely, you should place my mod above Sound fixes pack.
my files contain also the links to the improved sounds by Drive Safely for tractor and harvester.
also be sure you place my mod above any traffic pack and also map mods (if you use any)

Tested on 1.31.x game version.



 
Screenshots Mod
Real Traffic Density and Ratio 1.31.e by Cip (1.31.x) Real Traffic Density and Ratio 1.31.e by Cip (1.31.x) Real Traffic Density and Ratio 1.31.e by Cip (1.31.x) Real Traffic Density and Ratio 1.31.e by Cip (1.31.x)

Simple steps to install ETS2 Mods:

- download the mod «Real Traffic Density and Ratio 1.31.e by Cip (1.31.x)»
- use WinRAR or 7-zip and unzip the archive;
- copy the file with the extension .scs in My Documents/Euro Truck Simulator/mod folder
- start the game, go to your profile, see the Mod manager and activate the mod.

Add comment to this mod

Number of comments - 0

Did u tried this mod? We offer you to share your feedback from what you tested! Your review will be useful to viewers who are just about to download and to try this new mod.


Enter the two words shown in the image:*

Latest News ATS / ETS2


Latest ETS2 comments

  1. anwr anwrYesterday, 10:02 vreau sa descarc is... Euro Truck Simulator 2 Update 1.37 Open Beta Released
  1. mishech mishech29 May 2020 20:52 what isthe pasword of the zip file... Heavy Cargo Pack v8.1 [1.27.x]
  1. Lars Ostermann Geraae Lars Ostermann Geraae29 May 2020 15:56 No blinker/Inicator sound !? ... Mack R Series v1.5 by Harven (1.37.x) for ETS 2
All comments

Ads